Hotend's PLA Bi-Colour filament splits each spool into two distinct colours along its length, so every print gradually transitions from one shade to the next — no swapping spools, no manual colour changes, just feed it in and watch the shift happen layer by layer. Perfect for vases, planters, decor pieces, and any print where you want a bit of visual drama without touching your slicer settings.
Recommended Print Settings
Setting
Value
Nozzle Temp
200–215°C
Bed Temp
50–60°C
Print Speed
40–60 mm/s
Cooling Fan
100% after first layer
Bed Surface
PEI / textured plate recommended
Specs
Diameter: 1.75mm (±0.02mm)
Net Weight: 1kg (1000g)
A Tip From Us
For best results, print tall objects in vase mode or with minimal retraction settings — the colour shift shows off best when the layers flow continuously.
